07-05-2012, 09:17 PM
Excellent stuff Joe. I do quite fancy one of these or it's push button sister.
Andrew
Andrew
|
DAC90a Number Three.
|
|
07-05-2012, 09:17 PM
Excellent stuff Joe. I do quite fancy one of these or it's push button sister.
Andrew
08-05-2012, 07:07 AM
(07-05-2012, 09:17 PM)Andrewausfa Wrote: Excellent stuff Joe. I do quite fancy one of these or it's push button sister. That will be the DAC10 then Andrew. A lot were issued by the RNIB to blind people as once pre-set, the buttons were easy to operate to select tuned-in stations. I think that's where a lot of DAC10s originate from. They're not as straightforward to restore as the DAC90A due to the 'switchery' associated with tuning, which apart from the added complication, make it difficult to gain access to some components. They seem to be prone to cracks appearing at the corners of the plastic escutcheon. There's a good write-up about restoring one here: http://www.vintage-radio.com/recent-repa...dac10.html
Regards, David.
BVWS Member. G-QRP Club Member 1339. 'I'm in my own little world, but I'm happy, and they know me here'
08-05-2012, 07:51 PM
That would be indeed! Thanks David, a rather good write-up by Mr.Pullin.
Andrew
17-05-2012, 10:43 AM
I've finally finished this.
Of the remaining five capacitors two were leaking badly, two were iffy and one may have been OK but wasn't perfect. As my AVO Test Bridge only tests at 100V, and they were stone cold at the time, I changed the lot. The proof of the pudding was in the eating as it made a huge difference to the sound quality and volume, in fact I'd say it's the best performing of the three DAC90as I have. As that will annoy The Boss Man it seemed only fair to irk The Fiddler too so I changed the lamp shunt as well. The original was 75 ohms but was only reading 62 ohms. I initially tried a 100 ohm one but this didn't seem to make much difference so I fitted a 180 ohm and that is very nice. The lamps are still dim but produce a friendly orange glow. The other thing which is obviously 'wrong' with this set is the perspex trims from around the knobs are missing. There's nothing remaining of them, not even old glue, but I prefer the look of the knobs without this adornment so will not be looking to replace them. I've finally managed to get a photo in decent light:- All told it's turned out very well indeed. - Joe
17-05-2012, 12:16 PM
The cabinet is a real transformation Joe!
Regards, David.
BVWS Member. G-QRP Club Member 1339. 'I'm in my own little world, but I'm happy, and they know me here'
(17-05-2012, 01:40 PM)AlanBeckett Wrote: They were asking silly prices at the NVCF. Do you mean the ones that came with a 'Certificate of Authenticity' which seemed to add £50 to what would be a realistic asking price for such a commonplace radio? Basically, a piece of paper saying 'This is a Model DAC90A, manufactured from 1948 by Bush Radio Ltd'. Really? Well I never gnu ![]()
Regards, David.
BVWS Member. G-QRP Club Member 1339. 'I'm in my own little world, but I'm happy, and they know me here'
|
| Users browsing this thread: |
| 1 Guest(s) |