wanted

[Fidelity 26]

Iam looking fo two 9.5mm Ferrite rod P clips with 3 mm screw hole there are some on the bay but the scree hols are to big

[Mike Watterson]

Washers?

[joebog1]

Or a washer and a bush, made from a plastic spacer, to hold it in position.

j.b.

[Fidelity 26]

Yes maybe washers for a temp fix or anyone got a couple out of a broken radio ?

[FIXITNOW]

use a plastic insulating bush from a transistor mounting kit as these are about 3mm /4BA holes

[Fidelity 26]

use a plastic insulating bush from a transistor mounting kit  as these are about 3mm /4BA holes

I dont have any so where can i get some from ?

[Murphyv310]

eBay is your friend for most things you will need. Often some ingenuity is required, thinking out of the box will often come up with something very similar to the original part which has long since become obsolete.

[Fidelity 26]

eBay is your friend for most things you will need. Often some ingenuity is required, thinking out of the box will often come up with something very similar to the original part which has long since become obsolete.

Makeing them myself then ? Asking every ebay seller if the screw hole is 3mm for a 9.5mm rod is going to be a long job lol .Did other transister radio makers use same size ferrlte rods ?

[Murphyv310]

All you need is a "P" clip.
https://www.ebay.co.uk/itm/125426156758

[Fidelity 26]

All you need is a "P" clip.
https://www.ebay.co.uk/itm/125426156758

Not as easy as one think .The Dansette 111 has a 9.5mm F rod and a 3mm bolt.Most screw hole on ebay P clips are oversized so back to the washer solution or a scrap radio that has ones the same size .Or looking like a strip of plastic and form it with a heat gun