Avo 7 Mk2 cutout issues

0 Vote(s) - 0 Average
1
2
3
4
5

Avo 7 Mk2 cutout issues

Bushbaby

Senior Engineer in Charge

Posts: 1,383
Reputation: 10
Location: Hockley, Essex

#14

10-05-2021, 03:54 PM

I followed Jeffreys advice and soldered in 2 x 220R 2% 0.5watt resistors with a value of 438.9R. Having sorted out the zeroing by READING THE MANUAL (my error) the meter appears to be working well.

if all else fails...read the instructions!

Quote

Messages In This Thread

Avo 7 Mk2 cutout issues - by Bushbaby - 26-04-2021, 05:41 PM

RE: Avo 7 Mk2 cutout issues - by Murphyv310 - 26-04-2021, 06:04 PM

RE: Avo 7 Mk2 cutout issues - by peter scott - 26-04-2021, 06:17 PM

RE: Avo 7 Mk2 cutout issues - by Bushbaby - 27-04-2021, 11:52 AM

RE: Avo 7 Mk2 cutout issues - by Doodlebug - 27-04-2021, 01:13 PM

RE: Avo 7 Mk2 cutout issues - by Bushbaby - 27-04-2021, 01:26 PM

RE: Avo 7 Mk2 cutout issues - by BusyBee - 28-04-2021, 01:45 PM

RE: Avo 7 Mk2 cutout issues - by Bushbaby - 28-04-2021, 01:59 PM

RE: Avo 7 Mk2 cutout issues - by Bushbaby - 07-05-2021, 03:44 PM

RE: Avo 7 Mk2 cutout issues - by Craig - 09-05-2021, 07:33 AM

RE: Avo 7 Mk2 cutout issues - by Bushbaby - 09-05-2021, 05:29 PM

RE: Avo 7 Mk2 cutout issues - by Bushbaby - 09-05-2021, 06:31 PM

RE: Avo 7 Mk2 cutout issues - by Craig - 10-05-2021, 12:23 PM

RE: Avo 7 Mk2 cutout issues - by Bushbaby - 10-05-2021, 03:54 PM

Users browsing this thread:

1 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me