31-01-2021, 03:51 PM
That first one with a mix of IC's and passives must have been a beast to build and check: hats off to you. Most of mine have been nearly all IC packages and for that a board that lays out for them is the best. I use a Kynar insulated 30 swg solid wire that strips easy and solders well. Although burn proof it can be stripped by running the chisel point of the iron down it or using good strippers.
All getting harder as eyes not so good and maybe need new glasses but another prob could be cataracts. But keep on going, plenty of time and if I just do a couple of hours in a day, before the strain gets to me, thats OK.
thanks Gary
All getting harder as eyes not so good and maybe need new glasses but another prob could be cataracts. But keep on going, plenty of time and if I just do a couple of hours in a day, before the strain gets to me, thats OK.
thanks Gary
