Building a Standards Converter

[`FRANK.C]

In case the above is not clear this may help a little

To convert a .sof file to a .jic file the following has to be set

'Programming file type'   set to 'JTAG Indirect Configuration File(.jic)'
'Configuration device'    set to 'EPCS4'
'File name'    set to whatever you want to name the (.jic) file the default name is output_file.jic
'Flash Loader'   select 'Add device' => 'Cyclone II' => 'EP2C5'
'SOF data'   select 'Add file' => C:\hedghog_project_files\output_files\hedghog.sof

Frank