06-10-2018, 03:17 PM
(This post was last modified: 06-10-2018, 03:22 PM by peter scott.)
Hello Invercargill,
https://golbornevintageradio.co.uk/forum...p?tid=7116
Welcome to the forum. The vero layout is unlikely to work predictably above a few MHz. The use of a good ground plane as in the can lid is the way to go. It's not clear from the schematic or the photo if there is any supply rail decoupling. If not I would suggest a ceramic 0.01uF with short leads between rail and ground and possibly a larger electrolytic in parallel with it.
HTH
Peter
https://golbornevintageradio.co.uk/forum...p?tid=7116
Welcome to the forum. The vero layout is unlikely to work predictably above a few MHz. The use of a good ground plane as in the can lid is the way to go. It's not clear from the schematic or the photo if there is any supply rail decoupling. If not I would suggest a ceramic 0.01uF with short leads between rail and ground and possibly a larger electrolytic in parallel with it.
HTH
Peter
