10-07-2018, 02:44 PM
Hi,
The frame coils seem a good match and height has plenty of reserve.
As Jeffrey says maybe suck it and see, EHT needs to be 8-9Kv but it can give a really bright picture so I'd assume the beam current will be higher with the Sony CRT than the old Mullard.
Being fair Id like to see if it does work, the Jury though isn't out yet I suppose, Id happily bow down if I'm wrong.
I also thought that a 11 inch tube would be a better fit against the mask, The Philips T-vette was 11 inch and there is the Sony 110UK as well so a possible source of tubes.
The frame coils seem a good match and height has plenty of reserve.
As Jeffrey says maybe suck it and see, EHT needs to be 8-9Kv but it can give a really bright picture so I'd assume the beam current will be higher with the Sony CRT than the old Mullard.
Being fair Id like to see if it does work, the Jury though isn't out yet I suppose, Id happily bow down if I'm wrong.
I also thought that a 11 inch tube would be a better fit against the mask, The Philips T-vette was 11 inch and there is the Sony 110UK as well so a possible source of tubes.
