Now to rebuild the fixing points for the chassis.
They looks a pretty daunting task and are going to be a challenge.
I got a bit of scrap ABS and chopped it all up to make the bits that the chassis screws to screw into. These are fixed in place with xylene based lacquer as this melts ABS and dries quickly forming a true weld.
Once this was dry I filled the end closest to the front of the cabinet with hot melt glue.
Now I filled the space with epoxy from the other side to add further rigidity to the chunk of ABS that the screw will go into as well as grip the remains of the fixing point more solidly.
They looks a pretty daunting task and are going to be a challenge.
I got a bit of scrap ABS and chopped it all up to make the bits that the chassis screws to screw into. These are fixed in place with xylene based lacquer as this melts ABS and dries quickly forming a true weld.
Once this was dry I filled the end closest to the front of the cabinet with hot melt glue.
Now I filled the space with epoxy from the other side to add further rigidity to the chunk of ABS that the screw will go into as well as grip the remains of the fixing point more solidly.
