03-06-2012, 02:20 PM
I checked the output valve grid and found 2.5V on it. I changed the relevant cap which got it down to 12mV.
There were seven 0.1 mfd capacitors in all which I've changed. Before Mark starts muttering into his beer about scatter guns I tested them all. Two caused the neon in the AVO Test Bridge to flash, two made it glow dim and steady and the other three lit it up like a search light. It's certainly louder now and I'll change the 0.05 mfd ones when I get some.
The cabinet has polished up nicely too.
As far as I can tell the 6K8GT is connected like this (I suggest right-clicking and selecting 'Open in New Tab'):-
- Joe
There were seven 0.1 mfd capacitors in all which I've changed. Before Mark starts muttering into his beer about scatter guns I tested them all. Two caused the neon in the AVO Test Bridge to flash, two made it glow dim and steady and the other three lit it up like a search light. It's certainly louder now and I'll change the 0.05 mfd ones when I get some.
The cabinet has polished up nicely too.
As far as I can tell the 6K8GT is connected like this (I suggest right-clicking and selecting 'Open in New Tab'):-
- Joe
