Useful cheap small tester...

[Radio Fixer]

Is this the same thing: http://www.ebay.com/itm/2014-latest-M328...0009.m1982&_trkparms=aid%3D777000%26algo%3DABA.MBE%26ao%3D1%26asc%3D27538%26meid%3D9e2219b9db5c43949a305d301611ba2b%26pid%3D100009%26prg%3D11353%26rk%3D1%26rkt%3D4%26

All boxed up in a neat package.

Gary

[AlanBeckett]

Looks like it.
Why are they so keen in the ZIF Socket?
I'll put three proper Terminals on I think.

Alan

[Radio Fixer]

Is the second one a later version. Hard to work out the numbering as the first doesn't say much. At least the cased one gives:

2014 latest M328 version of the software ,more functions. Chip: Atmega328 128*64

the first says: LCR-T3

So no relation. Perhaps Nick knows. I did browse the translated article but it didn't help hugely .... maybe more time is needed and I'm really busy fighting the restoration of a radio as usual !!

Do you intend to get out your tiny iron and start changing and adding parts?

Gary

[Nick]

It seems to be basically the same hardware as the original Chinese/Taiwanese clones, but with some flashier s/w to do component graphics as a USP - the underlying firmware is slightly behind the official release which I believe is now 2.10 as opposed to 2.07 in the clones.

As a consequence, I suspect that the hardware mods I mentioned above which are needed to improve accuracy and stability probably still stand - I say "probably" as I've not had a chance to inspect this new variant - naturally, I could always be completely and utterly wrong on this...

FWIW, there is an LCR-T4 out there too, which seems identical in every way to the -T3. I suspect that too is just an attempt to say "Buy Me!" rather than buying one of the other 100 vendors offering much the same product

[AlanBeckett]

My LCR-T3 has arrived - just missed Christmas.
It is indeed much more swish than the one I can't find.
It's got a nice big Switch but I'm not too keen on the ZIF Socket. Also, I wish it didn't shut down quite so enthusiastically.
Still, onward and upward.

Alan

   

[Refugee]

Is that the bare board version of the one in message 81?

[AlanBeckett]

I believe so.
It's this - http://www.ebay.co.uk/itm/121309248191?_...2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
The Switch is different and there are no Components fitted to the alternative Connection Pads.

Alan

[Refugee]

I await your review.
There is a possibility I shall be buying one soon.

[AlanBeckett]

I ordered it on the 20th November and it arrived today. No doubt the Christmas Post slowed it down a bit.

Alan

[Nick]

Interesting - could yu have a look and see if this indeed a derivative of the original design and if the upgrades mention in post #71 have indeed been done?

Thanks