Ekco TSC30A

[Murphyv310]

Hi David.
Yes they look very busy and I just wonder how many chassis were left stockpiled after the announcement of us going to war? Of course not just chassis but cabinets too!!

[Murphyv310]

Hi.
Today i received a good CRM92A from Mikemushradio via David Boynes.
It is fitted and give a beautiful bright picture with far less focussing issues. There is still some edge focus problems but a little time tonight I decided to pull the CRT out a little with the set on, dodgy I know but the problem cleared albeit with corner cutting. I have found that the bottom threaded rod for lateral adjustment of the focus/centring coil is chewed up and the top one partly seized, this is the reason as the the focus assembly is not far enough back. I should be able to fix this the next time the chassis is out.
Pictures tomorrow.

[Murphyv310]

Hi.
Here are the screen shots from the Ekco with full light in the shed, door open, and lights on too.
I've done a couple of screen shots to show we are getting at least 2.5Mhz bars.
   
   
   
4:3 selected
   
5:4 selected

[Keya]

It is in excellent condition! I am working on the same not so long ago, but the condition was very bad (

[Murphyv310]

Hi.
The TSC30A is now very rare indeed. Do you have any pictures.

[Murphyv310]

Hi.
Keya, do you know where the Ekco badge is located on the set? I've just obtained one and would like to know the correct position for it.
Thanks in advance.