Sailor 16T Danish radio

[Bushbaby]

Hi Kev,
Well done - I'm so pleased that this power supply is now up and working.

Regards

Rob

[Yorkie]

Well done on sorting it so quickly Kevin.

Lucky that the damage to the PSU didn't knock on to the receiver itself.

I like the styling of Sailor stuff - very much in keeping with a marine environment, and as befits its role, water resistant. Bearing in mind just how big the shipping fleet is into which these radios were installed over many years, I dare say that there's actually quite a lot of these sets around. I've been in touch with Stef Niewiadomski who writes extensively in Radio Bygones and the BVWS Bulletin, and had written the Sailor article in the Winter BVWS Bull about the Sailor 66T, in which he added a PSU and speaker unit. He still uses his Sailor daily. He'd appealed for the manual, which I had, so was able to forward it to him.

I must keep my eyes peeled for one!

David

[kevin.Hoyland]

[attachment=2804][attachment=2804][attachment=2803][attachment=2802][attachment=2802][attachment=2800][attachment=2800][attachment=2799][attachment=2798]Hello.
Pictures of the repaired Transformer for the Sailor 16T.
Regards Kev.

[kevin.Hoyland]

Hello.

After repairing the Power supply transformer for the Sailor 16T i have found out that the out-put of the unit is 32 volts DC and not 12 volts DC.
Regards Kev.

[Bushbaby]

Hi Kev,
Good job you tested the voltage first before reconnecting

Rob