16-07-2023, 08:57 PM
(This post was last modified: 16-07-2023, 09:15 PM by Murphyv310.)
It is a doubler circuit.
Sorry I had to look again at the circuit. The cap would not supply current after the initial charge unless the diode was the opposite way to the magnetron.
Remember the anode of the magnetron is at ground the filament is at HT Negative. There is NO shorts on the HT side.
Sorry I had to look again at the circuit. The cap would not supply current after the initial charge unless the diode was the opposite way to the magnetron.
Remember the anode of the magnetron is at ground the filament is at HT Negative. There is NO shorts on the HT side.
