11-01-2023, 07:01 AM
The mains transformer is being used as an auto tfmr to reduce voltage to various components, at this moment I'm not sure exactly what to. At a guess maybe the motors, having said that I could be wrong and those taps just go to the voltage selector. I'll try and dig the notes I made when working on my WVB but I know I spent a few happy hours tracing out the circuit trying to figure out where all the spaghetti went which I've now gone and forgotten : )
It's not too bad, take loads of pictures and notes of what wires go where then pull it apart, you'll be happier in the end knowing it's all safe and you've done a good job.
AFAIK all Vortexion models are pretty much the same but with tweaks to the circuit. Once you start getting your head round the things it starts to make sense.
Good luck, Andy.
It's not too bad, take loads of pictures and notes of what wires go where then pull it apart, you'll be happier in the end knowing it's all safe and you've done a good job.
AFAIK all Vortexion models are pretty much the same but with tweaks to the circuit. Once you start getting your head round the things it starts to make sense.
Good luck, Andy.
