02-12-2022, 10:05 AM
(This post was last modified: 02-12-2022, 10:06 AM by Murphyv310.)
Hi
As Mark says there will be no issue leaving the 470k in circuit with the 3x 100k although I'd remove the old resistors. I'd also fit the correct values and use decent quality resistors suitably voltage rated and metal film or oxide. If you can use through hole resistors suitably mounted all the better.
As Mark says there will be no issue leaving the 470k in circuit with the 3x 100k although I'd remove the old resistors. I'd also fit the correct values and use decent quality resistors suitably voltage rated and metal film or oxide. If you can use through hole resistors suitably mounted all the better.
