27-11-2022, 07:46 PM
(This post was last modified: 27-11-2022, 07:47 PM by Mike Watterson.)
The Hameg is a nice scope. Mostly standard parts and easy to repair. The component tester / curve-tracer is nice. I added extra I/O on the rear at the blanked off bits. Maybe Z in and X out. Obvious connection points in the manual which has all the circuit schematics.
I had one in early 1980s and was given a similar one about 15 years ago. A 20V zener/avalanche diode and a 741 (in socket) needed replaced about 2 years ago.
Being analogue it will display signals at rubbish calibration to over 100 MHz even though it's a 20 MHz scope.
I had one in early 1980s and was given a similar one about 15 years ago. A 20V zener/avalanche diode and a 741 (in socket) needed replaced about 2 years ago.
Being analogue it will display signals at rubbish calibration to over 100 MHz even though it's a 20 MHz scope.
