I cannot afford stuff from RS anymore, but my previous experiences with them seems that even the chinese stuff is from the upside.
I use Hakko soldering irons. Made in China
.
Ive had them for 20 years, and apart from tips, havent had a problem.
You COULD of course get one made by Shagwha. the rusting V12 cars made in engrund.
To change or even check the spark plugs requires removing the whole drivetrain, OR cutting some big holes in the firewall.
IF its a Chinese soldering iron, it will only cost $20 to repair in any case.
I agree with TCP1's, I ran factories with 40 girls using them 8 hours a day, they didnt break down ( very often ).
BUT, the wheel weaves as the wheel will. Give it a go, WITH an open mind.
Joe
I use Hakko soldering irons. Made in China
.Ive had them for 20 years, and apart from tips, havent had a problem.
You COULD of course get one made by Shagwha. the rusting V12 cars made in engrund.
To change or even check the spark plugs requires removing the whole drivetrain, OR cutting some big holes in the firewall.
IF its a Chinese soldering iron, it will only cost $20 to repair in any case.
I agree with TCP1's, I ran factories with 40 girls using them 8 hours a day, they didnt break down ( very often ).
BUT, the wheel weaves as the wheel will. Give it a go, WITH an open mind.
Joe
