23-10-2022, 11:59 AM
Soldering back the switch resistor sorted out the loss of the effects (hooray), breaking the switch created a new problem (doh!). I didn't realise how old and fragile this material had become
I'm looking at taking off the outer paxolin cover to that switch and making a replacement. I will also see how the locking part of the switch is held on the inside. What I can see already is that with the base part of the cover gone, the locking part of the switch has dropped by a few mm's so that appears to be why it won't lock now. I can only try my best at this stage being more mechanics than purely electrical.
I used to try golf but my severe back pain causes to much issues. I still want to study electronics as much as I can but still somewhat busy work wise.
Best Regards
Rob
I'm looking at taking off the outer paxolin cover to that switch and making a replacement. I will also see how the locking part of the switch is held on the inside. What I can see already is that with the base part of the cover gone, the locking part of the switch has dropped by a few mm's so that appears to be why it won't lock now. I can only try my best at this stage being more mechanics than purely electrical.
I used to try golf but my severe back pain causes to much issues. I still want to study electronics as much as I can but still somewhat busy work wise.
Best Regards
Rob
if all else fails...read the instructions!
