29-06-2022, 03:59 PM
(This post was last modified: 29-06-2022, 03:59 PM by ppppenguin.)
Electrolytics have very wide tolerances, often -25% to +50%. Using 220uF to replace 250uF is fine. The 47uF can be used to replace the 60uF or you can use your 68uF.
Unless you can measure the voltages, including during warm-up, I wouldn't use a 300V replacement.
Unless you can measure the voltages, including during warm-up, I wouldn't use a 300V replacement.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
