09-02-2022, 04:50 PM
(This post was last modified: 09-02-2022, 04:53 PM by Murphyv310.)
Hi.
Further work done today with some caps changed in the frame and line stages. All were the tubular wax variety and a couple of metallised polythene covered types that showed considerable leakage. The 30P4MR although it works looks under stress in the set, I've no PL38s but a KT36 operates much better, I'll need to see if I can get hold of the correct valve.
There is something coming through the RF and very weak video, as yet I've not been near front end.
Further work done today with some caps changed in the frame and line stages. All were the tubular wax variety and a couple of metallised polythene covered types that showed considerable leakage. The 30P4MR although it works looks under stress in the set, I've no PL38s but a KT36 operates much better, I'll need to see if I can get hold of the correct valve.
There is something coming through the RF and very weak video, as yet I've not been near front end.
