25-01-2022, 09:35 PM
You won't cause any harm either way. If you use the 3 ohm output you won't get as much volume, but you probably won't notice. Use the 16 ohm output and you might overload the amp if you play a lot of very loud music but you'd have to try very hard to damage the amp.
If the 3 and 16 are taps on a single winding (seems likely) then you could get a 13 ohm nominal output between the 3 and 16 terminals. That's close enough to 8 to give you no worries.
If the 3 and 16 are taps on a single winding (seems likely) then you could get a 13 ohm nominal output between the 3 and 16 terminals. That's close enough to 8 to give you no worries.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
