|
Murphy A26
|
|
09-10-2021, 03:08 PM
(This post was last modified: 09-10-2021, 03:10 PM by Mike Watterson.)
Much what I'd expect. The 3 K might be good enough with four fine vertical wires in it soldered to an earth ring at the bottom and taped at the top till a coat of Graphit33 sets/dries. It can always be over-sprayed later to silver, light grey, red or gold to match an actual model.
|
| Messages In This Thread |
|
Murphy A26 - by AdrianPH - 21-06-2021, 11:10 PM
RE: Murphy A26 - by Crackle - 22-06-2021, 05:49 AM
RE: Murphy A26 - by AdrianPH - 26-06-2021, 10:01 AM
RE: Murphy A26 - by AdrianPH - 05-10-2021, 09:41 AM
RE: Murphy A26 - by Murphyv310 - 05-10-2021, 10:37 AM
RE: Murphy A26 - by AdrianPH - 05-10-2021, 11:07 AM
RE: Murphy A26 - by Freya - 05-10-2021, 11:12 AM
RE: Murphy A26 - by AdrianPH - 05-10-2021, 11:18 AM
RE: Murphy A26 - by Freya - 05-10-2021, 11:51 AM
RE: Murphy A26 - by ppppenguin - 05-10-2021, 12:32 PM
RE: Murphy A26 - by Radio Fixer - 06-10-2021, 08:31 AM
RE: Murphy A26 - by AdrianPH - 06-10-2021, 08:55 AM
RE: Murphy A26 - by Radio Fixer - 06-10-2021, 08:55 AM
RE: Murphy A26 - by AdrianPH - 06-10-2021, 02:19 PM
RE: Murphy A26 - by Mike Watterson - 06-10-2021, 02:57 PM
RE: Murphy A26 - by AdrianPH - 09-10-2021, 01:09 PM
RE: Murphy A26 - by Mike Watterson - 09-10-2021, 03:08 PM
RE: Murphy A26 - by AdrianPH - 14-03-2022, 07:51 PM
RE: Murphy A26 - by AdrianPH - 15-03-2022, 10:31 PM
RE: Murphy A26 - by Radio Fixer - 16-03-2022, 08:41 AM
RE: Murphy A26 - by AdrianPH - 16-03-2022, 09:00 AM
RE: Murphy A26 - by ppppenguin - 16-03-2022, 09:15 AM
RE: Murphy A26 - by AdrianPH - 23-03-2022, 11:18 AM
RE: Murphy A26 - by Radio Fixer - 23-03-2022, 11:32 AM
RE: Murphy A26 - by AdrianPH - 23-03-2022, 11:54 AM
RE: Murphy A26 - by ppppenguin - 23-03-2022, 01:45 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
