|
Murphy A26
|
|
06-10-2021, 02:19 PM
Well I have sprayed one side of a coffee jar with Graphit33 and the other side I have plastered on some Galva zinc. I will leave them for 24 Hours to cure and then may even give them a bit of heat and see what the results are like.
Adrian
Learning as I go!
Youtube EF91 Valve |
| Messages In This Thread |
|
Murphy A26 - by AdrianPH - 21-06-2021, 11:10 PM
RE: Murphy A26 - by Crackle - 22-06-2021, 05:49 AM
RE: Murphy A26 - by AdrianPH - 26-06-2021, 10:01 AM
RE: Murphy A26 - by AdrianPH - 05-10-2021, 09:41 AM
RE: Murphy A26 - by Murphyv310 - 05-10-2021, 10:37 AM
RE: Murphy A26 - by AdrianPH - 05-10-2021, 11:07 AM
RE: Murphy A26 - by Freya - 05-10-2021, 11:12 AM
RE: Murphy A26 - by AdrianPH - 05-10-2021, 11:18 AM
RE: Murphy A26 - by Freya - 05-10-2021, 11:51 AM
RE: Murphy A26 - by ppppenguin - 05-10-2021, 12:32 PM
RE: Murphy A26 - by Radio Fixer - 06-10-2021, 08:31 AM
RE: Murphy A26 - by AdrianPH - 06-10-2021, 08:55 AM
RE: Murphy A26 - by Radio Fixer - 06-10-2021, 08:55 AM
RE: Murphy A26 - by AdrianPH - 06-10-2021, 02:19 PM
RE: Murphy A26 - by Mike Watterson - 06-10-2021, 02:57 PM
RE: Murphy A26 - by AdrianPH - 09-10-2021, 01:09 PM
RE: Murphy A26 - by Mike Watterson - 09-10-2021, 03:08 PM
RE: Murphy A26 - by AdrianPH - 14-03-2022, 07:51 PM
RE: Murphy A26 - by AdrianPH - 15-03-2022, 10:31 PM
RE: Murphy A26 - by Radio Fixer - 16-03-2022, 08:41 AM
RE: Murphy A26 - by AdrianPH - 16-03-2022, 09:00 AM
RE: Murphy A26 - by ppppenguin - 16-03-2022, 09:15 AM
RE: Murphy A26 - by AdrianPH - 23-03-2022, 11:18 AM
RE: Murphy A26 - by Radio Fixer - 23-03-2022, 11:32 AM
RE: Murphy A26 - by AdrianPH - 23-03-2022, 11:54 AM
RE: Murphy A26 - by ppppenguin - 23-03-2022, 01:45 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
