10-09-2021, 02:57 PM
Humble apologies - I did say that the photos were from a similar amp but NOT mine. I've attached some of mine now.
When I indicated that there was no output I was referring to the fact that I added the replacement pots for those that had seized, certainly the volume and gain ones. After replacing, I put an input signal from a sound generator and nothing - no sound output at all!! I did stop at this point and left it until now.
This may not be related, but I have noticed scorch marks around the diodes ZD2 & 3 but have yet to test them?
Best Regards
Rob
When I indicated that there was no output I was referring to the fact that I added the replacement pots for those that had seized, certainly the volume and gain ones. After replacing, I put an input signal from a sound generator and nothing - no sound output at all!! I did stop at this point and left it until now.
This may not be related, but I have noticed scorch marks around the diodes ZD2 & 3 but have yet to test them?
Best Regards
Rob
if all else fails...read the instructions!
