24-07-2021, 06:43 AM
(This post was last modified: 24-07-2021, 06:46 AM by Murphyv310.)
Don't use any lubricant at all. They are assembled dry. Clean and polish the pivot point any bushings etc only clean. There is likely excess friction but you and I will think its fine. Some stirrers only spin once the food warms and convection starts.
Come to think of it the holes you mention are to do with the rotation of the stirrer from microwave energy.
Fire it up with a cup of water and see what it does.
Come to think of it the holes you mention are to do with the rotation of the stirrer from microwave energy.
Fire it up with a cup of water and see what it does.
