15-07-2021, 07:42 PM
(15-07-2021, 02:19 PM)Geordie McBoyne Wrote: all the wiring is 22swg so I reckon 1.5mm bore sleeving will be fine.
I don't have any silicone, but I do have PTFE sleeving in yellow, or even glass-fibre braided (acrylic impregnated) also in yellow. Both will take 22swg fine, though smaller than 1.5mm bore, and both of course are resistant to soldering iron burns!
Let me know if either will help.
