15-07-2021, 11:07 AM
Wow!! Wow!!! Yuck.
It looks like a lab prototype, "Oh, we need another valve, let's put a bracket here, there's space, and string a few wires to it."
And then, snatch it out of the development lab, bypass any Production Engineers, put it on the shop floor, "Copy this."
Is that an airborne joint I see on the right of the photo?
What diameter, etc? There's a chance I may be able to help.
I'll bet it works quite well, when operating properly, too.
Definitely needs saving, if only as an example of how not to go into production with a radio!
It looks like a lab prototype, "Oh, we need another valve, let's put a bracket here, there's space, and string a few wires to it."
And then, snatch it out of the development lab, bypass any Production Engineers, put it on the shop floor, "Copy this."
Is that an airborne joint I see on the right of the photo?
Geordie McBoyne Wrote:What is needed is silicon rubber sleeving. Such material is available from RS Components but is only offered in green, red and black. We need yellow for this set.
What diameter, etc? There's a chance I may be able to help.
I'll bet it works quite well, when operating properly, too.
Definitely needs saving, if only as an example of how not to go into production with a radio!
