09-06-2011, 05:07 PM
Yesterday I found the RT-1 had got a 1500Ω resistor which was snapped in half. I got around to looking and discovered I'd actually got one and after fitting it found it worked. As the case is safely on a shelf at the other side of the room I'd connected it to the ivory DAC90a's speaker which gave that a test too as I'd re-glued it bellows last night.
Yorkie is working on a dial scan for me so when that's fitted I'll play safe and call this set done. This will mean getting my printer to pint in colour though so I'm not counting my chickens.
If this is successful I may make a repro for the ivory DAC as the original is filthy and there's no way it'll come clean without taking the printing off.
- Joe
Yorkie is working on a dial scan for me so when that's fitted I'll play safe and call this set done. This will mean getting my printer to pint in colour though so I'm not counting my chickens.
If this is successful I may make a repro for the ivory DAC as the original is filthy and there's no way it'll come clean without taking the printing off.
- Joe
