26-06-2021, 08:03 PM
(This post was last modified: 26-06-2021, 08:04 PM by Murphyv310.)
Hi.
I'd change it from 150 to 220 ohms 1 watt. Just measure the voltage across the resistor and calculate the current, I think from memory the last one I did was 29ma with 220 ohms.
Very slightly lower than with a good UL41 and the original 150 ohms.
I'd change it from 150 to 220 ohms 1 watt. Just measure the voltage across the resistor and calculate the current, I think from memory the last one I did was 29ma with 220 ohms.
Very slightly lower than with a good UL41 and the original 150 ohms.
