|
125ohm resistor
|
|
06-05-2021, 06:45 AM
(This post was last modified: 06-05-2021, 06:47 AM by Murphyv310.)
Most valve amp circuits have resistors of 10% tolerance so if the 125 ohm wasn't a typo it could read anything from 118.75 to 131.25 ohms, this puts it in the correct perspective, remember also in many valve radios and amps the resistors go way out of tolerance and they can still perform very well.
|
| Messages In This Thread |
|
125ohm resistor - by Bushbaby - 05-05-2021, 06:04 PM
RE: 125ohm resistor - by Mark Hennessy - 05-05-2021, 06:46 PM
RE: 125ohm resistor - by Bushbaby - 05-05-2021, 07:05 PM
RE: 125ohm resistor - by ppppenguin - 05-05-2021, 07:15 PM
RE: 125ohm resistor - by Murphyv310 - 06-05-2021, 06:45 AM
RE: 125ohm resistor - by Craig - 06-05-2021, 08:35 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
