01-04-2021, 09:29 PM
(This post was last modified: 01-04-2021, 09:33 PM by Murphyv310.)
Hi.
It's a mix of electrical and physical wiring, very common on automotive diagrams TBH. To untrained eyes it is hard to follow and yes UN-conventional.
It certainly looks like the way its drawn is incorrect HT certainly should not be on the aerial coil. Perhaps the drawing should be checked properly and removed if found to be incorrect as it could mislead a novice "repairer".
It's a mix of electrical and physical wiring, very common on automotive diagrams TBH. To untrained eyes it is hard to follow and yes UN-conventional.
It certainly looks like the way its drawn is incorrect HT certainly should not be on the aerial coil. Perhaps the drawing should be checked properly and removed if found to be incorrect as it could mislead a novice "repairer".
