|
A Good Projection System?
|
|
24-03-2021, 01:59 PM
(24-03-2021, 01:41 PM)Kalee20 Wrote: Interesting that the line output stage had enough design margin to enable operation at 10.125kHz, that's down by 35% from American! It's only scanning a tiny, narrow angle, CRT. Albeit with a high EHT. I would expect such a LOP to be easily operable over a wide range of frequencies. I assume EHT is separately made, as with sets using the MW6/2.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
|
| Messages In This Thread |
|
A Good Projection System? - by peter scott - 24-03-2021, 09:04 AM
RE: A Good Projection System? - by Jac Janssen - 24-03-2021, 09:57 AM
RE: A Good Projection System? - by Murphyv310 - 24-03-2021, 01:03 PM
RE: A Good Projection System? - by peter scott - 24-03-2021, 10:43 AM
RE: A Good Projection System? - by Kalee20 - 24-03-2021, 01:41 PM
RE: A Good Projection System? - by ppppenguin - 24-03-2021, 01:59 PM
RE: A Good Projection System? - by Jac Janssen - 24-03-2021, 01:53 PM
RE: A Good Projection System? - by Jac Janssen - 24-03-2021, 02:52 PM
RE: A Good Projection System? - by Murphyv310 - 24-03-2021, 03:03 PM
RE: A Good Projection System? - by Jac Janssen - 24-03-2021, 06:06 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
