|
ulc82
|
|
02-03-2021, 07:07 AM
(This post was last modified: 02-03-2021, 07:07 AM by ppppenguin.)
Cold resistance doesn't matter. That only affects the surge current at start of warm-up. What really matters is the current. It should be 100mA for U series valves. If you have a meter that can measure AC current you can break the heater chain and make the measurement.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
|
| Messages In This Thread |
|
RE: ulc82 - by boater sam - 01-03-2021, 09:22 PM
RE: ulc82 - by ppppenguin - 02-03-2021, 07:07 AM
RE: ulc82 - by ppppenguin - 03-03-2021, 06:40 AM
RE: ulc82 - by Murphyv310 - 03-03-2021, 08:19 AM
RE: ulc82 - by ppppenguin - 03-03-2021, 05:53 PM
RE: ulc82 - by ppppenguin - 03-03-2021, 08:35 AM
RE: ulc82 - by Murphyv310 - 03-03-2021, 08:55 AM
RE: ulc82 - by Murphyv310 - 03-03-2021, 07:07 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
