21-01-2021, 01:18 PM
Hi Guys. As a follow up to my previous post, I have replaced all the Plessey electrolytic capacitors. This involved stuffing the old caps to keep its vintage appearance. The only exception was the AGC cap which was too small to fit another inside but I have used an axial and it looks ok. The cabinet cleaned and reassembled and it looks good. I have one problem. At the same point on the running capacitor I have an annoying microphonic crackle and the sound goes a little distorted. Not sure if it's the running cap or something else. Any suggestions would be very welcome.
Mike.
Mike.
