04-01-2021, 12:17 PM
If you're really lucky, there will be a vent through the pole piece - that's quite common with higher-powered bass drivers. I only found one photo that sort-of shows the rear of the drive unit, but the lighting isn't good enough to see whether or not there's a vent in the middle of the bucking magnet.
Failing that, the pin method will be fine. Though in my experience you can usually manipulate them without having to suck or pull - just a case of gently pushing in the right places. Won't always be possible, but always worth a try. You probably already have, but most people I know give up far too soon
Failing that, the pin method will be fine. Though in my experience you can usually manipulate them without having to suck or pull - just a case of gently pushing in the right places. Won't always be possible, but always worth a try. You probably already have, but most people I know give up far too soon
