30-12-2020, 08:53 PM
(This post was last modified: 30-12-2020, 08:56 PM by Geordie McBoyne.)
Didn't win the CRM121A.
To keep the topic alive today I used 12mm dowel pieces to fill the holes in the front panel.
After the glue is fully set the front panel will have new holes to allow the installation of the Plessey Mark 2 chassis.
Geordie McBoyne.
To keep the topic alive today I used 12mm dowel pieces to fill the holes in the front panel.
After the glue is fully set the front panel will have new holes to allow the installation of the Plessey Mark 2 chassis.
Geordie McBoyne.
