26-12-2020, 02:29 PM
Looking Great Frank, hope you have had A good Christmas.
Does the LCD use the whole height of the front panel plastic, or would it need a window cut out for the visible area. just thinking of mounting ideas.
If you do make any further PCB revisions could you move the 100nF and 10uF caps on the 3.3 volt reg further apart, its tricky soldering them so close together and being neat.
Stephen
Does the LCD use the whole height of the front panel plastic, or would it need a window cut out for the visible area. just thinking of mounting ideas.
If you do make any further PCB revisions could you move the 100nF and 10uF caps on the 3.3 volt reg further apart, its tricky soldering them so close together and being neat.
Stephen
