15-08-2020, 03:35 PM
The EL84 is rated at 5.5ma for the G2. On mine I get 3.95v on the cathode with the anode disconnected and that's with a new EL84. There is something way out on your set Sam, the current drawn from the G2 is is way too high for you to get nearly correct cathode volts.
In fact I'll just connect the anode to G2 with the B section of the tranny disconnected to see if I get any audio.
Give me 5 minutes.
In fact I'll just connect the anode to G2 with the B section of the tranny disconnected to see if I get any audio.
Give me 5 minutes.
