20-07-2020, 01:47 PM
(This post was last modified: 20-07-2020, 01:49 PM by Murphyv310.)
Hi.
No just the control grids (G1) to ground on the EL84 valves.
Powered up and meter on DC volts. Keep the ECC83 V3 plugged in.
Have you thoroughly checked for shorts or solder splashes that I suggested you check earlier on?
No just the control grids (G1) to ground on the EL84 valves.
Powered up and meter on DC volts. Keep the ECC83 V3 plugged in.
Have you thoroughly checked for shorts or solder splashes that I suggested you check earlier on?






