19-07-2020, 08:43 PM
Hi
The settings were exactly the same on the scope for both caps.
I've used 3 EZ81 (the first Philips Miniwatt shorted out - shame) - in all cases its been the same with the hum.
I will cold check pins 1 and 7 of the EZ81.
Best Regards
The settings were exactly the same on the scope for both caps.
I've used 3 EZ81 (the first Philips Miniwatt shorted out - shame) - in all cases its been the same with the hum.
I will cold check pins 1 and 7 of the EZ81.
Best Regards
if all else fails...read the instructions!
