05-07-2020, 04:26 PM
(This post was last modified: 05-07-2020, 04:35 PM by Murphyv310.)
Absolutely Kalee.
Hit the diode with freezer and hear the results or even solder it when on!!!!
So far using the two very high value resistors do improve matters. Using a 2mf choke on the anode to ground reduces volume and I suspect it's the chokes inherent capacitance that is damping the RF from the first stage. I'll try an old fashioned one tomorrow that will be lower capacitance than the small modern one I tried.
Once I get the 1N60s I'll try the reverse diode to ground etc.
Hit the diode with freezer and hear the results or even solder it when on!!!!
So far using the two very high value resistors do improve matters. Using a 2mf choke on the anode to ground reduces volume and I suspect it's the chokes inherent capacitance that is damping the RF from the first stage. I'll try an old fashioned one tomorrow that will be lower capacitance than the small modern one I tried.
Once I get the 1N60s I'll try the reverse diode to ground etc.
