15-06-2020, 08:23 AM
(13-06-2020, 07:13 PM)Mike Watterson Wrote: You need a vacuum pump for a decent desoldering station and a separate soldering iron. A hot air rework station (not a DIY heat gun!) is also handy.
Many desoldering stations, e.g. the Metcal MX-5200 + MX-DS1 that I use, operate with standard shop compressed air and the desoldering gun, in this case the MX-DS1, creates it's own vacuum using the Venturi Effect.
sıʌǝɹq ɐʇıʌ `ɐƃuol sɹɐ
ʞɔıu
ʞɔıu
