07-01-2020, 10:14 AM
Any core driven to saturation will make excess noise. The pincushion transductor made a horrible noise. It was being driven into saturation at both H and V frequencies. Hence a buzzy whistle. Line lienarity coils are also intended to saturate. LOPTs shouldn't saturate.
It's been suggested that S correction instroduces an H/2 component into the scan current.
Frank, I don't think you have a 405 monitor. Doing all the standards conversion work with a modulator and receiver seems far too hard. I may have another spare one of these 12" monitors available which you could have. Need to see how it works out on 405. Obviously for collection when you're next in England. NVCF?
It's been suggested that S correction instroduces an H/2 component into the scan current.
Frank, I don't think you have a 405 monitor. Doing all the standards conversion work with a modulator and receiver seems far too hard. I may have another spare one of these 12" monitors available which you could have. Need to see how it works out on 405. Obviously for collection when you're next in England. NVCF?
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
