01-12-2019, 11:33 PM
50Hz power transformers have been varnish impregnated since before WW2, so if it is wax impregnated it is really old.
The only time that wax is preferable is in high frequency step up transformers (tens of kHz). Tektronix used to impreg in wax, and everything was fine and dandy. Then they swapped to epoxy in the mid 60's, and failures started as the epoxy began to degrade and become lossy. They finally went across to silicone impreg.
The only time that wax is preferable is in high frequency step up transformers (tens of kHz). Tektronix used to impreg in wax, and everything was fine and dandy. Then they swapped to epoxy in the mid 60's, and failures started as the epoxy began to degrade and become lossy. They finally went across to silicone impreg.







