03-11-2019, 07:18 PM
Having tried a couple of suggestions, I find that the broken pin will not push through from the underside, so I can oly conclude that the tag end snapped off below the twisted part of the pin, and that it's stuck fast due to the twist. Re-reading your suggestion, Sam, I'm just wondering what inserting a small screw at the tube end will achieve, but if I can find a small-enough screw I'll give it a try. Of course if I can determine which, if any, if the unused pins are internally connected to the anode, I could simply rewire the anode connection to the pin in question instead.
