30-09-2019, 10:45 AM
I have been occupying myself with making a box to house the power supply.
It is made from some 5mm ply left over from a door that I panelled.
The round opening is for the PSU fan and the narrow slots on the sides are for air intake.
The large window in the front is where the meter for volts, amps & watts will go, and the on/off switch.
The output binding posts will be fitted through the ply below the meter.
Its currently in primer waiting on final testing for size & fit when I get the meter and the aluminium panel the meter will be mounted on.
Mike
It is made from some 5mm ply left over from a door that I panelled.
The round opening is for the PSU fan and the narrow slots on the sides are for air intake.
The large window in the front is where the meter for volts, amps & watts will go, and the on/off switch.
The output binding posts will be fitted through the ply below the meter.
Its currently in primer waiting on final testing for size & fit when I get the meter and the aluminium panel the meter will be mounted on.
Mike
