22-08-2019, 06:15 PM
Hi Michael
step 3 needs some clarification.
3) is that 30nF on each of the points mentioned to ground. Or a 10nF cap on each of the 3 points.
What is " o/p to the resistor going to adjust pin. " is that in //LL with R1?
thanks
Mike
step 3 needs some clarification.
3) is that 30nF on each of the points mentioned to ground. Or a 10nF cap on each of the 3 points.
What is " o/p to the resistor going to adjust pin. " is that in //LL with R1?
thanks
Mike






