|
DAC90A Beginner
|
|
25-03-2019, 06:33 PM
(25-03-2019, 05:58 PM)Murphyv310 Wrote: Cut pin 4 off the UL41 with a Dremel and still use the base as an anchor point.... Job done! I'm a little unhappy about this as it could stress the glass/metal seal. However if you've done it several times without trouble I'll be happier. Don't cut it off with side cutters as that will definitely stress the seal.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
|
| Messages In This Thread |
|
DAC90A Beginner - by markandrewberry - 19-03-2019, 05:25 PM
RE: DAC90A Beginner - by markandrewberry - 19-03-2019, 08:56 PM
RE: DAC90A Beginner - by Terry - 21-03-2019, 11:55 AM
RE: DAC90A Beginner - by Refugee - 19-03-2019, 10:18 PM
RE: DAC90A Beginner - by ppppenguin - 19-03-2019, 10:45 PM
RE: DAC90A Beginner - by Nick - 19-03-2019, 10:58 PM
RE: DAC90A Beginner - by boater sam - 20-03-2019, 02:44 AM
RE: DAC90A Beginner - by Ed_Dinning - 20-03-2019, 06:28 AM
RE: DAC90A Beginner - by markandrewberry - 20-03-2019, 07:37 AM
RE: DAC90A Beginner - by Old Sparky - 20-03-2019, 08:28 AM
RE: DAC90A Beginner - by Murphyv310 - 21-03-2019, 11:23 PM
RE: DAC90A Beginner - by Terry - 22-03-2019, 11:03 AM
RE: DAC90A Beginner - by ppppenguin - 20-03-2019, 08:55 AM
RE: DAC90A Beginner - by Ed_Dinning - 21-03-2019, 06:09 AM
RE: DAC90A Beginner - by Nick - 21-03-2019, 08:34 AM
RE: DAC90A Beginner - by markandrewberry - 21-03-2019, 05:43 PM
RE: DAC90A Beginner - by Stitch1 - 23-03-2019, 07:24 AM
RE: DAC90A Beginner - by Kalee20 - 25-03-2019, 01:13 PM
RE: DAC90A Beginner - by Murphyv310 - 22-03-2019, 11:24 AM
RE: DAC90A Beginner - by Old Sparky - 22-03-2019, 01:29 PM
RE: DAC90A Beginner - by Terry - 22-03-2019, 05:11 PM
RE: DAC90A Beginner - by Murphyv310 - 23-03-2019, 08:27 AM
RE: DAC90A Beginner - by boater sam - 23-03-2019, 09:52 AM
RE: DAC90A Beginner - by Terry - 23-03-2019, 11:40 AM
RE: DAC90A Beginner - by pwdrive - 23-03-2019, 11:46 AM
RE: DAC90A Beginner - by Murphyv310 - 23-03-2019, 11:52 AM
RE: DAC90A Beginner - by Murphyv310 - 23-03-2019, 11:47 AM
RE: DAC90A Beginner - by pwdrive - 23-03-2019, 12:05 PM
RE: DAC90A Beginner - by Crackle - 24-03-2019, 06:41 AM
RE: DAC90A Beginner - by Murphyv310 - 23-03-2019, 10:16 PM
RE: DAC90A Beginner - by boater sam - 23-03-2019, 11:14 PM
RE: DAC90A Beginner - by boater sam - 23-03-2019, 11:29 PM
RE: DAC90A Beginner - by ppppenguin - 24-03-2019, 07:26 AM
RE: DAC90A Beginner - by Murphyv310 - 24-03-2019, 08:16 AM
RE: DAC90A Beginner - by markandrewberry - 24-03-2019, 08:44 PM
RE: DAC90A Beginner - by ppppenguin - 25-03-2019, 01:27 PM
RE: DAC90A Beginner - by pwdrive - 25-03-2019, 03:21 PM
RE: DAC90A Beginner - by Terry - 25-03-2019, 06:17 PM
RE: DAC90A Beginner - by pwdrive - 25-03-2019, 06:41 PM
RE: DAC90A Beginner - by Kalee20 - 25-03-2019, 05:23 PM
RE: DAC90A Beginner - by ppppenguin - 25-03-2019, 05:30 PM
RE: DAC90A Beginner - by pwdrive - 25-03-2019, 05:37 PM
RE: DAC90A Beginner - by Murphyv310 - 25-03-2019, 05:58 PM
RE: DAC90A Beginner - by ppppenguin - 25-03-2019, 06:33 PM
RE: DAC90A Beginner - by Murphyv310 - 25-03-2019, 08:53 PM
RE: DAC90A Beginner - by markandrewberry - 02-04-2019, 12:22 PM
RE: DAC90A Beginner - by boater sam - 02-04-2019, 12:43 PM
RE: DAC90A Beginner - by markandrewberry - 02-04-2019, 12:50 PM
RE: DAC90A Beginner - by ppppenguin - 02-04-2019, 01:07 PM
RE: DAC90A Beginner - by Ed_Dinning - 02-04-2019, 06:40 PM
|
| Users browsing this thread: |
| 1 Guest(s) |
