23-03-2019, 11:46 AM
Tektronix used wire on wire connecting strips, wire on wire for component replacement is ok if it's done skillfully, any service engineer in the R&TV trade that hasn't done that must have either a bad memory or not actually fixed much.....
Replacing a silvered mica capacitor in a receivers tuned circuit with one of the same value is not very likely to cause the alignment to be "all over the shop"
Some times replacing capacitors en mass is actually the less damaging route.
….Just sayin'
Lawrence.
Replacing a silvered mica capacitor in a receivers tuned circuit with one of the same value is not very likely to cause the alignment to be "all over the shop"
Some times replacing capacitors en mass is actually the less damaging route.
….Just sayin'
Lawrence.
