20-02-2019, 02:30 PM
The resistor values are on the Trader sheet and I've quoted them at least twice in this thread. If you're epxerimenting, start high and work down to get the right voltage on the filaments. The voltage will be misleadingly high if any of the valves are removed.
DK96 has listed equivalents of 1AB6 and CV9026 and should be fited in V1. V3 is a DAF96, equivalents are 1AH5 and CV9024. I think you said that the set worked at one point so the valves can't be too far wrong.
DK96 has listed equivalents of 1AB6 and CV9026 and should be fited in V1. V3 is a DAF96, equivalents are 1AH5 and CV9024. I think you said that the set worked at one point so the valves can't be too far wrong.
www.borinsky.co.uk Jeffrey Borinsky www.becg.tv
